2022 ANCA EDG3
CNC Tool & Cutter Grinders · 2 listings (equipt.com, machinetools.com)
CNC Tool & Cutter Grinders
ANCA EDG3
2 ANCA EDG3 listings have come through the used market we track: 2 marketplaces, all built 2022; 1 machine once repeats are merged.
What the maker publishes about the current ANCA EDG3
In ANCA's EDG range, the EDG3 is a single column machine that both erodes and grinds, working on PCD, HSS and carbide tooling in one setup. Its direct-drive spindle has two ends and holds two wheel packs, one for erosion and grinding and one for grinding only; changing packs takes under 5 seconds. Spindle power is 9 kW at peak and 3.7 kW in S1 duty. Erosion runs from ANCA's SparX generator over EtherCAT, and the CNC is an ANCA Motion AMC5. X and Y carry linear scales as standard, and an electrode dresser is mounted inside. Shanks up to 32 mm and flute lengths up to 275 mm fit, depending on tooling. Sizes run from 0.4 mm drills, through new drills and end mills of 12 mm and resharpened ones of 25.4 mm, to saws and profile tools 220 mm across. A FastLoad loader is optional and holds 156 tools of 6 mm or 68 of 12 mm.
Source: ANCA, October 27, 2026.
What the ANCA EDG3 is used for
Making and resharpening PCD, carbide and HSS cutting tools is the work ANCA's EDG3 page names, from PCD drills as small as 0.4 mm through end mills and profile tools to saw blades of 220 mm.
Source: ANCA, October 27, 2026.
ANCA EDG3 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Spindle and speed
Spindle motor powerSpindle power (peak)
9 kW (12 HP)peak (Spitze)
Control
ControlCNC
ANCA Motion AMC5 CNC
Further figures the manufacturer publishes
Spindle power (S1)
3.7 kW (5 HP)S1 continuous duty
Wheel packs
21 x erosion and grinding, 1 x grinding
Tool diameter (shank)
32 mm (1 ¼”)
Tool length (max), flute length
275 mm (11”)depending on tooling, where applicable
Loader type
FastLoad (option)optional
Max. tool capacity (with loader)
156 x Ø6 mm or 68 x Ø12 mmwith the optional loader
Drive system
Ball screw (Kugelumlaufspindel)
Dimensions
2160 mm L x 1530 mm W x 1990 mm H
Machine construction
Single column (Einzelsäule)
Wheel pack change
under 5 seconds
- manufacturer specification page, fetched October 27, 2026.
What to check on an ANCA EDG3
- Control generation. The manufacturer specifies ANCA Motion AMC5 CNC for this model.
- Spindle load. The manufacturer gives 9 kW (12 HP) (peak (Spitze)) of spindle power. Take a heavy cut and watch the load meter.
ANCA EDG3 control
- Control ANCA Motion AMC5 CNC
ANCA EDG3 listing history
Where it was listed
equipt.com
1 listing, 2022
machinetools.com
1 listing, 2022
Model years seen
2022 ×2.
Looking for an ANCA EDG3 for sale?
We have tracked 2 ANCA EDG3 listings on 2 marketplaces (equipt.com and machinetools.com), model year 2022. We buy ANCA EDG3 machines and do not sell them.
Every ANCA EDG3 we have tracked
The ANCA EDG3 among grinders
Browse all CNC Tool & Cutter Grinders, or see every ANCA machine we track.
Other grinders in this directory
ANCA RX7
- Units tracked
- 1
- Years seen
- 2005
Chevalier FSG-618M
- Units tracked
- 18
- Years seen
- 1989–2020
Okamoto ACC-12-24ST
- Units tracked
- 13
- Years seen
- 1997–2008
Have an ANCA EDG3 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
