2013 Makino A92
Used · CNC Horizontal Machining Centers (HMC)
CNC Horizontal Machining Centers (HMC)
Makino A92
19 Makino A92 listings have come through the used market we track on 8 marketplaces, built from 2006 to 2013 where the listing gave a year; one early year that only one marketplace reports is left out. Listings that repeat the same machine are shown once, as 15 machines.
59.8 inX-axis travel
49.2 inY-axis travel
53.1 inZ-axis travel
10,000 RPMSpindle speed; 8,000 RPM on others
What the maker publishes about the current Makino A92
Makino's a92 is a four-axis horizontal machining center for large part production, and the maker names diesel engine blocks and construction equipment manufacturing among its uses. Pallet size is 800 x 1,000 mm. Axis travels are 1,520 mm in X, 1,250 mm in Y and 1,350 mm in Z. Spindle speed is listed as 10,000 rpm, with 8K and 20K shown beside it. Taper is CAT50, with HSK-A100 as an option. Rapid traverse and cutting feedrate are both 50,000 mm/min. The largest workpiece is ø1,500 x 1,500 mm. Payload is 2,000 kg, with 3,000 kg as an option. Magazine capacity is listed as 40, with 60, 92, 148, 204 and 316 also shown. Tool to tool time is 1.9 sec, and chip to chip time is 5.4 sec. Maximum tool diameter is 356 mm with the 40/60 ATC and 350 mm with the 92 ATC and larger. The weight limit per tool is 30 kg with the 40/60 ATC and 35 kg with the 92 ATC and larger.
Source: Makino, October 14, 2026.
Makino A92 specifications
Manufacturer specification. Every figure below was read from the manufacturer’s own published specification for this machine and checked back against that document word for word.
These are the manufacturer’s figures for this model as currently published. A machine built years ago may differ in control generation and in options, which is exactly why the questions below matter when you sell one.
Capacity and travels
X-axis travelX
1,520 mm
Y-axis travelY
1,250 mm
Z-axis travelZ
1,350 mm
AxesHorizontal Machining 4-Axis
4-Axis
Spindle and speed
Max spindle speedSpindle RPM
10,000 (8K, 20K)
Spindle taperSpindle Taper
CAT50 (HSK-A100 opt)
Rapid traverseRapid Traverse
50,000 mm/min
Table, turret and tools
Max table loadMaximum Payload
2,000 kg (option 3,000 kg)
Pallet sizePallet
800 x 1,000 mm
Tool capacityATC Capacity
40 (60, 92, 148, 204, 316)
Further figures the manufacturer publishes
Cutting Feedrate
50,000 mm/min
Maximum Workpiece
ø1,500 x 1,500 mm
Tool to Tool
1.9 sec
Chip to Chip
5.4 sec
Maximum Tool Diameter
356 mm (40/60 ATC), 350 mm (92 ATC and larger)
Maximum Tool Weight
30 kg (40/60 ATC), 35 kg (92 ATC and larger)
- manufacturer specification page, fetched October 14, 2026.
What fits a Makino A92
Each of these follows from a published specification above, which is named beside it.
50-taper toolholders
This is a 50-taper spindle — the 7:24 steep taper that CAT-50, BT-50 and DIN 69871 (SK-50) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed. The manufacturer names CAT for this machine. HSK-A100 is offered as an OPTION on this model, so a given machine may or may not have it. It is a different interface from the taper above, and worth confirming on the machine itself rather than from the model number.
Derived from Spindle taper: CAT50 (HSK-A100 opt)
Pallets and fixturing
Fixtures, tombstones and spare pallets are cut for a pallet of this size and do not transfer to another machine. On a horizontal they are a large share of what is being sold, so count them before quoting.
Derived from Pallet size: 800 x 1,000 mm
What to check on a Makino A92
- Spindle. The manufacturer gives a spindle speed of 10,000 (8K, 20K). Run the spindle to top speed and listen for bearing noise.
- Axes and way covers. The manufacturer gives X 1,520 mm, Y 1,250 mm and Z 1,350 mm of travel. Run each axis end to end and check the way covers.
- Tool changer. The manufacturer gives the tool capacity as 40 (60, 92, 148, 204, 316). Cycle every pocket and watch for a hesitation.
- Pallet changer. The manufacturer gives a pallet size of 800 x 1,000 mm. Run a full pallet change, and count the pallets and fixtures that come with the machine.
Makino A92 listing history
Where it was listed
machnet.com
4 listings, model years 2006 to 2013
quickmachinerysales.com
4 listings, model years 2006 to 2011
surplusrecord.com
3 listings, model years 2007 to 2009
usedcnc.com
3 listings, model years 2010 to 2011
machinetools.com
2 listings, model year 2007
equipt.com
1 listing, model year 2007
machinesused.com
1 listing, model year 2008
revelationmachinery.com
1 listing, model year 2009
Model years seen
2013 (2 units), 2011 (4 units), 2010, 2009 (2 units), 2008, 2007 (3 units), 2006 (4 units).
What Makino A92 listings agree on
X-axis travel
59.8 in
Y-axis travel
49.2 in
Z-axis travel
53.1 in
Spindle speed
10,000 RPM (5 machines); 8,000 RPM (4 machines)
Spindle power
50 hp (2 machines); 47 hp (2 machines)
Spindle taper
CAT 50
Tool capacity
92 (4 machines); 40 (2 machines)
Machine weight
75,000 lb
Every Makino A92 we have tracked
2013 Makino A92
Used · CNC Horizontal Machining Centers (HMC)
Spindle speed
8,000 RPM
Spindle power
50 hp
2011 Makino A92
Used · CNC Horizontal Machining Centers (HMC) · Listed 2 times (quickmachinerysales.com)
Spindle speed
10,000 RPM
2011 Makino A92
Used · CNC Horizontal Machining Centers (HMC)
2011 Makino A92
Used · CNC Horizontal Machining Centers (HMC)
Spindle speed
8,000 RPM
Spindle power
50 hp
2010 Makino A92
Used · CNC Horizontal Machining Centers (HMC)
Spindle speed
10,000 RPM
Spindle power
47 hp
Tool capacity
40
2009 Makino A92
Used · CNC Horizontal Machining Centers (HMC)
Spindle speed
10,000 RPM
Tool capacity
92
2009 Makino A92
Used · CNC Horizontal Machining Centers (HMC)
2008 Makino A92
Used · CNC Horizontal Machining Centers (HMC)
2007 Makino A92
Used · CNC Horizontal Machining Centers (HMC) · Listed 3 times (machinetools.com, equipt.com, surplusrecord.com)
Spindle speed
10,000 RPM
Tool capacity
92
2006 Makino A92
Used · CNC Horizontal Machining Centers (HMC) · Listed 2 times (quickmachinerysales.com)
Spindle speed
8,000 RPM
Spindle power
47 hp
Tool capacity
92
2006 Makino A92
Used · Metal Cutting
2006 Makino A92
Used · CNC Horizontal Machining Centers (HMC)
Spindle speed
8,000 RPM
Tool capacity
92
Makino A92
Used · CNC Horizontal Machining Centers (HMC)
Spindle speed
10,000 RPM
Tool capacity
40
1 more listing gave the early year left out above.
The Makino A92 among machining centers and mills
Browse all CNC Horizontal Machining Centers (HMC), or see every Makino machine we track.
Models related to the Makino A92
Makino A81NX
Same series
- X-axis travel
- 900 mm1this model: 1,520 mm2
- Pallet size
- 630 mm x 630 mm1this model: 800 x 1,000 mm2
- Makino A81NX: manufacturer specification page, fetched September 16, 2026.
- Makino A92: manufacturer specification page, fetched October 14, 2026.
Have a Makino A92 to sell?
We are the buyer, not a broker. No listing fee, no commission, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, we handle rigging and freight, and we arrange the pickup.