Sell your Okuma CADET-V 1998 today.
Okuma CADET-V Specifications
| Table Travels X Axis | 40.0 |
|---|---|
| Tool Changer Style | Carousel |
| Spindle Nose To Tbl Surface | 6.1-26.1 |
| X-Axis Feed Rate | 941 |
| Feed Rates | 475 |
| All Axes | 941/941/475 |
| Axes | X, Y, Z |
| Rapid Traverse Rate (X,Y) | 941/941 |
| C-Axis | false |
| Number Of Axis | 3 |
| Table Length | 47" |
| Axis Travels | X: 40.0, Z: 20.0 |
| Axis Control | false |
| Max Tool Weight | 13.2 |
| Tool Capacity | 20.0 |
| Tool Diameter | 5.9 |
| Rapid Traverse Rate X,Y,Z,A,C | 941/941/475 |
| Palette Length | 47" |
| Air Requirement | false |
| Max Load | 1100.0 |
| Y-Axis (Cross Travel) | false |
| Z – Axis Travel | 20.0 |
| Max Speed | 8000.0 |
| Gear Head Spindle | false |
| Distance Between Columns | false |
| Jog Feed Rate | false |
| Y-Axis Movement | false |
| X-Axis Rapid Traverse Rate | false |
| Speed Range | false |
| Tool Taper | CAT#40 |
| Turning | false |
| Tool Stations | false |
| Tool Shank | false |
| Automation Capability | false |
| Additional Axis | false |
| Apc | false |
| Additional Equipment | false |
| Coolant | false |
| Automatic Tool Changer (Atc) | false |
| Outer Width | false |
| Spindle Center To Pallet Top | false |
| Pallet Top Surface To Floor Height | false |
| Above The Bed | false |
| Spindle Nose To Pallet Top | false |
| Coolant Tank | false |
| Rapid Traverse (A/B Axis) | false |
| Head (Z Axis) | false |
| Table Dimensions | false |
| Shipping Dimensions | false |
| Distance From Spindle To Table | false |
| Min-Max | false |
| C Axis Table Rotate | false |
| Thru Spindle Coolant Pump | false |
| Motor Power | 15 |
| Approximate Machine Weight | false |
| Rapid Traverse | false |
| Z-Axis | 20.0 |
| Number Of Tables | false |
| Dimenisons (Lxwxh) | false |
| Max. Tool Length | 12.0 |
| Rapid Traverse Rate Y | false |
| X & Y Rapid Traverse | false |
| Travel | false |
| Y-Axis | false |
| Table Pallet Size | false |
| Spindle End To Table Surface | false |
| Y-Axis Feed Rate | false |
| Rapid Traverse (X/Y Axis) | false |
| Z-Axis Ballscrew Dia./Pitch | false |
| Saddle (Y Axis) | false |
| Apc Motor | false |
| X-Y | false |
| Maximum Tool Diameter | 5.9 |
| Spindle Torque | false |
| X-Axis Travel | 40.0 |
| Main Motor | false |
| Tooling Capacity | false |
| Table Index | false |
| Maximum Turning Diameter | false |
| A-Axis Travel | false |
| Workpiece Height | false |
| Weight On Table | false |
| Travel Y-Axis | false |
| Item Details | false |
| Max. Part Weight | false |
| Tool Holder | false |
| Approx. Weight | false |
| X, Y, Z Axis Thrusts | false |
| Rapid Traverse Rates | false |
| Spindle Power | false |
| Automatic Tool Changer Capacity (Atc) | false |
| Additional Machine Specs | false |
| Max. Tool Diameter | 5.9 |
| X – Axis Travel | 40.0 |
| Rapid Traverse Z | false |
| Max. Tool Length/Weight | 12.0 |
| Main Motor HP | false |
| Auto Mode (Z Axis) | false |
| Max Spindle Speed | 8000.0 |
| Rapid X,Y & Z | false |
| Z-Axis Rapid Traverse | false |
| Live Milling Thru Spindle Coolant | false |
| Max Clearance Tabletop To Spindle Nose | false |
| Rapid Feedrate | false |
| X & Y Axes | false |
| Load Capacity | false |
| # Tables | false |
| # Of Axis | 3 |
| Machine Size | false |
| Purchase Invoice | false |
| Control Options | false |
| Max Output | false |
| Z Axis Rapid Traverse | false |
| Distance Floor To Table Top | false |
| # Poles | false |
| Plate Diameter | false |
| Automatic Tool Changer | false |
| First Hand | false |
| Max Tool Length | 12.0 |
| Spindle Taper Hole | false |
| Rapid Traverse X | false |
| Z | false |
| Y | false |
| Turret Tools | false |
| Spindle Center Height From Floor | false |
| Current | false |
| Live Tooling Milling | false |
| Workholding | false |
| Max Turning Dia | false |
| Tool Magazine | false |
| Approx. Dimensions | false |
| Rapid Traverse Rate | false |
| Pallet Top To Spindle Center | false |
| Hydraulic Unit Dimensions | false |
| B Axis Table Tilt | false |
| Travel X-Axis | 40.0 |
| Number Of Atc Positions | false |
| Features | false |
| Cut Time | false |
| Table Width | false |
| Turning Speed | false |
| Auto Tool Changer | false |
| Size Of Table | false |
| Atc | false |
| Max Cutting Feedrate | false |
| Spindle Drive | false |
| Vertical Z | false |
| Max Tool Diameter | 5.9 |
| B-Axis Travel | false |
| Cutting Feedrate A/B Axis | false |
| Turning Length | false |
| Approximate Height | false |
| Working Surface | false |
| Max Travel(X) | false |
| W Axis Travel | false |
| Tool Changer Magazine Capacity | false |
| Rotary Table | false |
| Turret | false |
| Table Size-L | false |
| Coolant Through Spindle | false |
| Spindle Bearing Diameter | false |
| Max Turning Length | false |
| Ram/Spindle/Table Cross Travel | false |
| Turning Functions Up To | false |
| Power Supply | false |
| Max Tool Size | false |
| Name | false |
| Torque | false |
| Up To | false |
| Simultaneous 5 Axis Cutting | false |
| Max Swing Inside The Guards | false |
| Axis X | false |
| Coolant Thru Spindle | false |
| Rapid Feed Rates | false |
| Electrical | false |
| Travels | false |
| Additional Features | false |
| Programming And Cam Software | false |
| Tool To Tool Change Speed | false |
| Table-L | false |
| Rapid Rate Y Axis | false |
| Column To Spindle Center | false |
| Number Of Tools | false |
| Multiposition Tool Changer Dimensions | false |
| Magazine Capacity | 20.0 |
| Axis Z | false |
| Y Travel | false |
| Maximum Part Diameter | false |
| Max. Spindle Speed | 8000.0 |
| Pallet Type | false |
| Tool Dia. | false |
| HP | false |
| Width Between Columns | false |
| Gantry Load Stations | false |
| Type | false |
| Pallet Change Time | false |
| A-Axis | false |
| Table Working Surface | false |
| Table Load | false |
| Gearbox | false |
| Rotary Table Trunnion | false |
| Rotary Table Size | false |
| Voltage | false |
| Pallet Size | false |
| Rapid Traverse Rate B | false |
| Speed | false |
| Laser Power | false |
| Axis Capability | false |
| Horsepower | false |
| Rapid Rate Z Axis | false |
| No. Of Pallets | false |
| Y Axis Travel | false |
| Spindle Motor HP | 15 |
| Throat Distance | false |
| Length X Width X Height | false |
| Max Cutting Length | false |
| Spindle Nose To Table (Min.- Max.) | false |
| Spindle Nose To Table | false |
| Machine Dimensions | false |
| X And Y Feed Rates | false |
| Cross" Y | false |
| Quill Diameter | false |
| Table Load Capacity | false |
| Chip Conveyor | false |
| Rapid Traverse X-Axis | false |
| X Axis Travel | 40.0 |
| Table Capacity | false |
| Rapid Traverse Rate (All Axes) | 941/941/475 |
| Axis Travel X | 40.0 |
| Laser Type | false |
| Max Spindle Speeds | 8000.0 |
| Dynamic Fixture Offset | false |
| Z Axis Feed | false |
Do you have a Okuma CADET-V to sell?
We are actively seeking a 1998 Okuma Cadet-V Vertical Machining Center to purchase. This reliable machine is a notable addition to the world of CNC vertical machining centers (VMC), perfect for a variety of machining tasks. With a generous X travel of 40.0 inches and a Z travel of 20.0 inches, the Cadet-V offers ample workspace to accommodate a wide range of projects. It features a maximum table pallet load of 1100 pounds, ensuring that it can handle substantial materials with ease.
The spindle motor, rated at 15 HP, enables a maximum spindle speed of 8000 RPM, allowing for efficient cutting operations. The machine is equipped with a tool changer type carousel, which has a tool magazine capacity of 20 tools, facilitating quick and efficient tool changes with a tool change time of just 3.6 seconds. This can significantly enhance productivity on the shop floor. While the Cadet-V does not include live tooling or a programmable tailstock, its cutting feed rate of 475 and rapid traverse speeds of 941 inches per minute in both the X and Y axes ensure that it remains competitive in performance.
The spindle taper type is CAT#40, which is a standard in the industry, providing flexibility in tool selection. If you have a 1998 Okuma Cadet-V that you are looking to sell, we encourage you to reach out to us. At Superior Machine Tools, we specialize in purchasing used CNC machines and can offer you a competitive price for your equipment. Don't miss the opportunity to turn your unused machinery into cash — contact us today for a quote!
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.