Sell your Mazak quick turn smart 100s cnc turning center 2011 today.
Mazak quick turn smart 100s cnc turning center Specifications
| Chuck Size | 6" |
|---|---|
| W Axis | Yes |
| Max Bar Capacity | 2" |
| Spindle Horsepower (Cont./30 Min.) | 15/20 HP |
| X1-Axis Travel | 7.87" |
| Spindle Power | 15 HP |
| Capacity | 2" |
| Swing Over Carriage | 15.75" |
| X-Axis (Cross Travel) | 5.12" |
| Z-Axis (Longitudinal Travel) | 13.78" |
| Y-Axis | Yes |
| Tailstock Quill Taper | MT4 |
| Minimum Spindle Indexing Increment | 0.001° |
| Tailstock Quill Travel | 3.94" |
| Second Spindle Horsepower | 10 HP |
| Swing Over Bed | 20.87" |
| Spindle Speeds 1, 2 | 6000 RPM |
| Rapid Traverse Y Axis | Yes |
| Design | CNC |
| Spindle Nose | A2-5 |
| Main | 15 HP |
| Rapid Traverse X-Axis | Yes |
| Tailstock Body Travel | 13.78" |
| C - Axis Travel 1, 2 | Yes |
| Spindle Speed (Mill) | 6000 RPM |
| Approximate Machine Height | 75" |
| Standard Cutting Diameter | 10" |
| Main Drive Motor | 15 HP |
| Sub Spindle Motor | 10 HP |
| X-Axis Rapid Traverse Rate | Yes |
| Tooling | VDI |
| Turret Positions | 12 |
| W Axis Travel (Sub Spindle) | Yes |
| Distance Between Spindle Faces (Max.) | 27.95" |
| Machining Length | 13.78" |
| Chuck Type | Hydraulic |
| Maximum Tool Weight | 6.6 lbs |
| Maximum Machining Diameter | 10" |
| Max. Cutting Diameter | 10" |
| Spindle Bore Diameter | 2.4" |
| Turret Indexing Time | 0.15 sec |
| Included Tooling | Yes |
| Sub | 10 HP |
| Rapid Traverse Z Axis | Yes |
| Electrical | 220V |
| Spindle Indexing (C-Axis) | Yes |
| Rapid Traverse Rates | Yes |
| Center Distance | 13.78" |
| Additional Equipment | Parts Conveyor |
| Main Spindle Bore Diameter | 2.4" |
| Machining Spindle Horsepower | 15 HP |
| Max Work Transfer Diameter | 2" |
| Y-Axis Travel | 3.94" |
| Spindle Motor Power | 15 HP |
| Control System | CNC |
| Maximum Tool Diameter | 2" |
| Spindle HP | 15 HP |
| Rapid Traverse | Yes |
| Tailstock Control | Programmable |
| Bed Length | 13.78" |
| Spindle Speed | 6000 RPM |
| Main Spindle Power | 15 HP |
| Max Bar Capacity Sub Spindle | 2" |
| Tool Presetters | Yes |
| Maximum Cutting Length Chuckwork | 13.78" |
| Mfr | Quick Turn |
| Max Swing Over Bed | 20.87" |
| B-Axis Travel | Yes |
| Main Circuit | 220V |
| High Pressure Coolant System | Yes |
| Rotary Tool Motor | Yes |
| Rapid Traverse Rates X-Axis | Yes |
| Hydraulic Chuck (Sub) | Yes |
| Maximum Drill | 1" |
| Automatic Tool Eye | Yes |
| Tool | VDI |
| Spindle Liners | Yes |
| Tailstock | Programmable |
| Spindle Drive | Belt |
| Max. Spindle Speed | 6000 RPM |
| Live Tool Holders | Yes |
| Type Of Turret | VDI |
| Tool Size | 2" |
| Approximate Machine Dimensions | 100" x 75" x 80" |
| Rapid Traverse Rate X | Yes |
| Z-Axis (L) | 13.78" |
| Total Number Of Tools | 24 |
| Rapid Traverse B Axis | Yes |
| Main Spindle Horsepower | 15 HP |
| Tapping | Yes |
| Chuck Diameter (L&R) | 6" |
| Z2 Axis Lower | Yes |
| Second Spindle Maximum RPM | 6000 RPM |
| Main & Second Spindle Motor | 15/10 HP |
| Turret Rotary Tool Horse Power | 5 HP |
| Collet Chuck | Yes |
| Turret Index Time | 0.15 sec |
| Rapid Traverse C - Axis | Yes |
| Operating System | CNC |
| Rapid Traverse Z - Axis | Yes |
| Main Spindle Bore | 2.4" |
| Maximum Tool Length | 6" |
| Weight | 8800 lbs |
| Sub Spindle Rapid Traverse Rate | Yes |
| Rapid Traverse (Y-Axis) | Yes |
| Main Spindle Max. Bar Work | 2" |
| Rotary Tool Spindle Horsepower/(10 Min) | 5 HP |
| Tool Storage Capacity | 24 |
| Bar Work Capacity | 2" |
| Horsepower Head 1 | 15 HP |
| X-Axis Travel/Rapid Reverse | 5.12" |
| Rapid Traverse Rate - X1 | Yes |
| Max Turning Diameter | 10" |
| Chuck Size (2Nd Spindle) | 6" |
| Max Machining Length (Chuck Work) | 13.78" |
| Z-Axis Stroke | 13.78" |
| Maximum Bar Work | 2" |
| Number Of Turret Positions | 12 |
| Z-Axis Travel/Rapid Reverse | 13.78" |
| Turret Number Of Tools | 24 |
| Second Spindle Maximum Bar Work | 2" |
| Turning Speed | 6000 RPM |
| Diameter | 10" |
| Spindle Bore Main | 2.4" |
| Motor Output (5/10 Min. Rating) | 15/10 HP |
| Type | CNC |
| Swing | 20.87" |
| Bar | 2" |
| Live Tooling | Yes |
| Spindle Torque (25% Ed) | 70 ft-lbs |
| Turret Stations | 12 |
| Turret Travels (X,Z) | 5.12" x 13.78" |
| Live Tool Power | 5 HP |
| Number Of Spindles | 2 |
| Z1 Axis Travel | 13.78" |
| Second Spindle Bore | 2.4" |
| B Axis Travel | Yes |
| Turret Rotary Tool Spindle Speed | 6000 RPM |
| Chuck Size (Main) | 6" |
| Tailstock Travel | 13.78" |
| Rapid Traverse (C-Axis) | Yes |
| Turret Configuration | VDI |
| Max Machining Length (Shaft Work) | 13.78" |
| Y1-Axis | 3.94" |
| Sub Spindle Bore | 2.4" |
| With Adjacent Pocket Empty | Yes |
| Turning Diameter | 10" |
| Shaft Diameter | 2" |
| Max Weight Capacity | 6.6 lbs |
| Main Spindle Indexing | 0.001° |
| Distance Between Spindle Faces | 27.95" |
| Turret Type | VDI |
| Maximum Turning Length | 13.78" |
| C - Axis | Yes |
| Z-Axis | 13.78" |
| Number Of Axes | 3 |
| Load / Unload Tray | Yes |
| Maximum Cutting Length For Chuckwork | 13.78" |
| Distance Between Center | 13.78" |
| Barfeed | Yes |
| Travel | 13.78" |
| Rapid Traverse Rates Z1 | Yes |
| Z2 | Yes |
| Maximum Swing Over Cross Slide | 15.75" |
| Second Spindle Nose | A2-5 |
| Maximum Bar Diameter | 2" |
| Mill Spindle Power | 15 HP |
| Z-Axis Travel (L) | 13.78" |
| Horsepower | 15 HP |
| Machine Dimensions | 100" x 75" x 80" |
| # Axis | 3 |
| Rear Chuck Prep | Yes |
| Z-Axis Rapid Feedrate | Yes |
| Parts Conveyor | Yes |
| Travels | X: 5.12", Z: 13.78" |
| Maximum Machining Length | 13.78" |
| Features | Programmable Tailstock |
| Maximum Machining Length For Shaftwork | 13.78" |
| X Rapid Traverse Rate | Yes |
| Machine Height | 75" |
| Turret Air Blast | Yes |
| Chuck Size (Subspindle) | 6" |
| Second Chuck Size | 6" |
| Spindle Horsepower (30 Min.) | 20 HP |
| W - Axis Travel Sub Spindle | Yes |
| Coolant System | Yes |
| Tool Type | VDI |
| Spindle Horsepower 1 | 15 HP |
| Programmable Tailstock | Yes |
| C-Axis | Yes |
| Max RPM | 6000 |
| Spindle Motor | 15 HP |
| Spindle Bore Diameter 1 | 2.4" |
| Gantry Load / Unloading | Yes |
| Center To Center | 13.78" |
| Spindle Nose 1 | A2-5 |
| Power | 220V |
| Control Circuit | 220V |
| Power Source | Electric |
| Bar Feed | Yes |
| Maximum Machining Diameter (Lower) | 10" |
| Machine Weight | 8800 lbs |
| Tailstock Quill Stroke | 3.94" |
| Rated Capacity | 15 HP |
| Max Cutting / Turning Diameter | 10" |
| Spindle | 6000 RPM |
| Power Requirement | 220V |
| Motor Output (Half-Hourly Rating) | 15 HP |
| Main Spindle Chuck Size | 6" |
| Maximum Swing Over Lower Turret | 15.75" |
| Feedrate | Yes |
| Mill Spindle Maximum RPM | 6000 RPM. |
Do you have a Mazak quick turn smart 100s cnc turning center to sell?
We are actively seeking a 2011 Mazak Quick Turn Smart 100S CNC Turning Center. This highly regarded horizontal CNC turning center is known for its reliability and precision, making it a valuable asset in any machine shop. The Quick Turn Smart 100S offers a compact design, perfect for efficient space utilization while delivering high performance. With a powerful spindle motor and a user-friendly control system, it can handle a variety of turning tasks with ease.
The machine's rigid construction ensures stability during operation, allowing for tight tolerances and superior surface finishes. We understand the importance of maximizing production capabilities, and the Mazak Quick Turn Smart 100S is engineered to enhance productivity without compromising on quality. If you are looking to sell your used Mazak Quick Turn Smart 100S, we invite you to reach out to us. At Superior Machine Tools, we pride ourselves on offering competitive prices and a hassle-free selling experience.
Our team is dedicated to providing you with a straightforward process, ensuring you receive the best value for your equipment. Don't miss the opportunity to turn your unused machinery into cash. Contact us today to discuss your Mazak Quick Turn Smart 100S CNC Turning Center and learn how we can help you with your selling needs.
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.