Sell your Mazak QTU-200MSY 2017 today.
Mazak QTU-200MSY Specifications
| Chuck Size | 2 |
|---|---|
| W Axis | Yes |
| Max Bar Capacity | 200mm |
| Spindle Horsepower (Cont./30 Min.) | 30 HP |
| X1-Axis Travel | Yes |
| Spindle Power | Yes |
| Capacity | Yes |
| Swing Over Carriage | Yes |
| X-Axis (Cross Travel) | Yes |
| Z-Axis (Longitudinal Travel) | Yes |
| Y-Axis | Yes |
| Tailstock Quill Taper | Yes |
| Minimum Spindle Indexing Increment | Yes |
| Tailstock Quill Travel | Yes |
| Second Spindle Horsepower | Yes |
| Swing Over Bed | Yes |
| Spindle Speeds 1, 2 | Yes |
| Rapid Traverse Y Axis | Yes |
| Design | Yes |
| X-Axis Travel | Yes |
| Spindle Nose, Main | Yes |
| Rapid Traverse X-Axis | Yes |
| Tailstock Body Travel | Yes |
| C - Axis Travel 1, 2 | Yes |
| Spindle Speed (Mill) | Yes |
| Approximate Machine Height | Yes |
| Standard Cutting Diameter | Yes |
| Main Drive Motor | Yes |
| Sub Spindle Motor | Yes |
| X-Axis Rapid Traverse Rate | Yes |
| Tooling | Yes |
| Turret Positions | Yes |
| W Axis Travel (Sub Spindle) | Yes |
| Distance Between Spindle Faces (Max.) | Yes |
| Machining Length | Yes |
| Chuck Type | Yes |
| Maximum Tool Weight | Yes |
| Maximum Machining Diameter | Yes |
| Max. Cutting Diameter | Yes |
| Spindle Bore Diameter | Yes |
| Turret Indexing Time | Yes |
| Included Tooling | Yes |
| Spindle Nose, Sub | Yes |
| Rapid Traverse Z Axis | Yes |
| Electrial | Yes |
| Spindle Indexing (C-Axis) | Yes |
| Rapid Traverse Rates | Yes |
| Center Distance | Yes |
| Additional Equipment | Yes |
| Main Spindle Bore Diameter | Yes |
| Machining Spindle Horsepower | Yes |
| Max Work Transfer Diameter | Yes |
| X - Axis Travel | Yes |
| Y-Axis Travel | Yes |
| Spindle Motor Power | Yes |
| Control System | Yes |
| Maximum Tool Diameter | Yes |
| Spindle HP | Yes |
| Rapid Traverse | Yes |
| Tailstock Control | Yes |
| Bed Length | Yes |
| Spindle Speed | Yes |
| Main Spindle Power | Yes |
| Max Bar Capacity Sub Spindle | Yes |
| Tool Presetters | Yes |
| Maximum Cutting Length Chuckwork | Yes |
| Mfr | Yes |
| Max Swing Over Bed | Yes |
| B-Axis Travel | Yes |
| Chuck Size 1, 2 | Yes |
| Main Circuit | Yes |
| High Pressure Coolant System | Yes |
| Rotary Tool Motor | Yes |
| Hydraulic Chuck (Sub) | Yes |
| Maximum Drill | Yes |
| Automatic Tool Eye | Yes |
| Tool | Yes |
| Spindle Liners | Yes |
| Tailstock | Yes |
| Spindle Drive | Yes |
| Max. Spindle Speed | Yes |
| Live Tool Holders | Yes |
| Type Of Turret | Yes |
| Tool Size | Yes |
| Approximate Machine Dimensions | Yes |
| Rapid Traverse Rate X , Z | Yes |
| Sub Spindle Speed | Yes |
| Milling Drill Size | Yes |
| Sub-Spindle | Yes |
| Z1-Axis | Yes |
| X - Axis Travel 1, 2 | Yes |
| Tool Size Milling | Yes |
| Distance Between Centers | Yes |
| Spindle Speed Range | Yes |
| Od Turning Tool Size | Yes |
| No. Positions On Turret | Yes |
| Max. Swing | Yes |
| Tool Size (Boring Bar Max. Dia.) | Yes |
| Max Turning Length | Yes |
| Tailstock Quill Dia. | Yes |
| Spindle Speeds Range | Yes |
| Gantry | Yes |
| Rapid Traverse X | Yes |
| High Power Coolant | Yes |
| Approximate Machine Weight | Yes |
| Rotary Tools Speed Range (Live Tools) | Yes |
| Load Stations | Yes |
| Z1-Axis Travel | Yes |
| Z-Axis (L) | Yes |
| Total Number Of Tools | Yes |
| Rapid Traverse B Axis | Yes |
| Main Spindle Horsepower | Yes |
| Tapping | Yes |
| Chuck Diameter (L&R) | Yes |
| Z2 Axis Lower | Yes |
| Second Spindle Maximum RPM | Yes |
| Main & Second Spindle Motor | Yes |
| Rapid Traverse Z-Axis | Yes |
| Turret Rotary Tool Horse Power 1 | Yes |
| Collet Chuck | Yes |
| Turret Index Time | Yes |
| Rapid Traverse C - Axis | Yes |
| Spindle Speed, Main | Yes |
| Operating System | Yes |
| Rapid Traverse Z - Axis | Yes |
| Main Spindle Bore | Yes |
| Maximum Tool Length | Yes |
| Shaft Size | Yes |
| Weight | Yes |
| Sub Spindle Rapid Traverse Rate | Yes |
| Rapid Traverse (Y-Axis) | Yes |
| Main Spindle Max. Bar Work | Yes |
| Rotary Tool Spindle Horsepower/(10 Min) | Yes |
| Tool Storage Capacity | Yes |
| Bar Work Capacity | Yes |
| Horsepower Head 1 | Yes |
| Head 2 | Yes |
| X-Axis Travel/Rapid Reverse | Yes |
| Rapid Traverse Rate - X1 | Yes |
| Max Turning Diameter | Yes |
| Chuck Size (2Nd Spindle) | Yes |
| Max Machining Length (Chuck Work) | Yes |
| Z-Axis Stroke | Yes |
| Maximum Bar Work | Yes |
| Number Of Turret Positions | Yes |
| Z-Axis Travel/Rapid Reverse | Yes |
| Turret Number Of Tools | Yes |
| Second Spindle Maximum Bar Work | Yes |
| Turning Speed | Yes |
| Signal Tower Lights | Yes |
| Diameter | Yes |
| Spindle Bore Main | Yes |
| X2-Axis (Lower) | Yes |
| Motor Output (5/10 Min. Rating) | Yes |
| Type | Yes |
| Swing | Yes |
| Bar | Yes |
| Live Tooling | Yes |
| Spindle Torque (25% Ed) | Yes |
| Turret Stations | Yes |
| Turret Travels (X,Z) | Yes |
| Live Tool Power | Yes |
| Number Of Spindles | Yes |
| Z1 Axis Travel | Yes |
| X1-Axis | Yes |
| Second Spindle Bore | Yes |
| B Axis Travel | Yes |
| Turret Rotary Tool Spindle Speed 1 | Yes |
| Chuck Size (Main) | Yes |
| Tailstock Travel | Yes |
| Rapid Traverse (C-Axis) | Yes |
| Turret Configuration | Yes |
| Max Machining Length (Shaft Work) | Yes |
| Y1-Axis | Yes |
| Sub Spindle Bore | Yes |
| With Adjacent Pocket Empty | Yes |
| Turning Diameter | Yes |
| Shaft Diameter | Yes |
| Max Weight Capacity | Yes |
| Main Spindle Indexing | Yes |
| Distance Between Spindle Faces | Yes |
| Turret Type | Yes |
| Maximum Turning Length | Yes |
| Spindle Speed, Sub | Yes |
| C - Axis | Yes |
| Z-Axis (R) | Yes |
| Number Of Axes | Yes |
| Load / Unload Tray | Yes |
| Maximum Cutting Length For Chuckwork | Yes |
| Distance Between Center | Yes |
| Barfeed | Yes |
| Travel | Yes |
| Rapid Traverse Rates Z1 | Yes |
| Z2 | Yes |
| Maximum Swing Over Cross Slide | Yes |
| Second Spindle Nose | Yes |
| Maximum Bar Diameter | Yes |
| Mill Spindle Power | Yes |
| Z-Axis Travel (L) | Yes |
| Horsepower | Yes |
| Machine Dimensions | Yes |
| # Axis | Yes |
| Rear Chuck Prep | Yes |
| Z-Axis Rapid Feedrate | Yes |
| Parts Conveyor | Yes |
| Travels | Yes |
| Maximum Machining Length | Yes |
| Features | Yes |
| Maximum Machining Length For Shaftwork | Yes |
| X Rapid Traverse Rate | Yes |
| Machine Height | Yes |
| Turret Air Blast | Yes |
| Chuck Size (Subspindle) | Yes |
| Second Chuck Size | Yes |
| Spindle Horsepower (30 Min.) | Yes |
| W - Axis Travel Sub Spindle | Yes |
| Coolant System | Yes |
| Tool Type | Yes |
| Z-Axis | Yes |
| Spindle Horsepower 1 | Yes |
| Programmable Tailstock | Yes |
| C-Axis | Yes |
| Max RPM | Yes |
| Spindle Motor | Yes |
| Spindle Bore Diameter 1, 2 | Yes |
| Gantry Load / Unloading | Yes |
| Center To Center | Yes |
| Spindle Nose 1 | Yes |
| Power | Yes |
| Control Circuit | Yes |
| Power Source | Yes |
| Bar Feed | Yes |
| Maximum Machining Diameter (Lower) | Yes |
| Machine Weight | Yes |
| Tailstock Quill Stroke | Yes |
| Rated Capacity | Yes |
| Max Cutting / Turning Diameter | Yes |
| Spindle | Yes |
| Power Requirement | Yes |
| Motor Output (Half-Hourly Rating) | Yes |
| Main Spindle Chuck Size | Yes |
| Maximum Swing Over Lower Turret | Yes |
| Feedrate | Yes |
| Mill Spindle Maximum RPM | Yes |
| Max | Yes |
Do you have a Mazak QTU-200MSY to sell?
We are actively seeking a 2017 Mazak QTU-200MSY, a highly versatile multi-tasking lathe that excels in precision machining. Known for its robust capabilities, this CNC turning center features a 6.7" and 5.3" 3-jaw Kitagawa chuck, which ensures secure and accurate clamping of workpieces. With powerful 25/20 HP spindles, this machine is engineered to handle a variety of materials, making it ideal for complex and high-volume production tasks. The 12-station turret adds to its efficiency, allowing for quick tool changes and increased productivity during operations.
Additionally, the inclusion of a sub-spindle enhances its multi-tasking ability, enabling simultaneous machining processes that save time and reduce handling. The Y-axis functionality provides added flexibility, allowing for intricate machining operations that would typically require multiple setups. Equipped with Mazak's SmoothC control, operators can expect a user-friendly interface that simplifies programming and enhances overall machine performance. The rigid tap feature further supports precision threading operations, while the chip conveyor ensures a clean and efficient workspace.
If you have a Mazak QTU-200MSY that you are considering selling, now is the perfect time to reach out to us. At Superior Machine Tools, we specialize in purchasing used CNC machines, and we offer competitive prices based on current market conditions. Don't miss the opportunity to turn your idle equipment into cash. Contact us today for an appraisal and see how we can help you maximize the value of your used machinery.
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.