Sell your Mazak INTEGREX-J-300 2012 today.
Mazak INTEGREX-J-300 Specifications
| Total Power Required (Machine Only) | 20/25 HP |
|---|---|
| Rapid Traverse X | 24.21" |
| Rapid Traverse Z | 27.36" |
| Max Cutting Length | 24.76" |
| Maximum Part Load | 27,800 Lbs |
| X-Axis Travel | 24.21" |
| Z-Axis Travel | 27.36" |
| Horsepower Of Rotary Head | 30 HP |
| Machine Dimensions Lxwxh | Not Available |
| Main Spindle Bore | 3.54" |
| Spindle Torque | Not Available |
| Rotary Tool Motor Horsepower | Not Available |
| Maximum Workpiece Weight (Chucked) | 27,800 Lbs |
| Spindle Bore Diameter | 3.54" |
| Spindle Speed | 4,000 RPM |
| Max Diameter Bar Capacity | 3.15" |
| Z – Axis | 27.36" |
| Gantry Dimensions | Not Available |
| Boring Bar Shank Diameter | Not Available |
| Maximum Drill | Not Available |
| Coolant Tank Capacity | Not Available |
| Max. Work Weight | 27,800 Lbs |
| Cutting Diameter | Not Available |
| Sub Spindle RPM | Not Available |
| X5Th Axis | Not Available |
| Distance | Not Available |
| Turret To Spindle Face | Not Available |
| C - Axis Indexing | 0.0001 Degree |
| Rapid Traverse Rate X-Y-Z | Not Available |
| Auto Tool Presetter | Not Available |
| Hydraulic Steady Rest Capacity | Not Available |
| Milling Capacity | Not Available |
| Coolant Pressure | Not Available |
| Tail Stock Diameter | Not Available |
| Turret Tool Positions | Not Available |
| Mist Collector | Not Available |
| Rotary Motor | Not Available |
| C - Axis Travel | Not Available |
| Automatic Tool Changer Capacity | 20 Tool |
| W - Axis | Not Available |
| Max. Spindle Torque | Not Available |
| Nbr Of Spindles | Not Available |
| Spindle Travel | Not Available |
| First Spindle Chuck Size | Not Available |
| Max. Boring Bar Diameter | Not Available |
| Coolant Tank Dimensions | Not Available |
| Tailstock Body Stroke | Not Available |
| Z-Axis Travels | 27.36" |
| Min. Spindle N/C Contouring | Not Available |
| Center Height | Not Available |
| Travel Z-Axis | 27.36" |
| Max RPM (Milling Tool) | 12,000 RPM |
| Rapid Traverse Rate X & Z | Not Available |
| Swing Over Bed Ways | 26.77" |
| Maximum Bar Work Diameter | 3.15" |
| Rapid Traverse Rate Z- Axis | 27.36" |
| Turret Rotary Tool Speeds | Not Available |
| Min. Spindle Indexing (Main Spindle Only) | Not Available |
| Sub Spindle Rapids | Not Available |
| Max Swing Over Cross Slide | Not Available |
| Mill Spindle Speed | 12,000 RPM |
| Tailstock Spindle Center / Spindle Diameter | Not Available |
| C Axis Travel | Not Available |
| Max. Tailstock Travel | 40.39" |
| Steady Rest | Not Available |
| Tool Holder Type | Not Available |
| Vector Dual Drive | Not Available |
| 29.5 In Max. Cutting Diameter | 19.69" |
| Weight | 27,800 Lbs |
| Number Of Spindle | Not Available |
| Between Centers | Not Available |
| Automation | Not Available |
| Mfr | Not Available |
| Y Stroke | +/- 4.92" |
| X2- Axis Travel (Lower Turret) | Not Available |
| Spindle Horsepower (Cont/30 Mins.) | 20/25 HP |
| Above Transversing Slide | Not Available |
| Tailstock Stroke | Not Available |
| Assorted Tooling | Not Available |
| Sub Spindle | Not Available |
| Max Milling Spindle Speed (Hi-Torque) | 12,000 RPM |
| Rapid Traverse ( X/Z ) | Not Available |
| Additional Machine Specs | Not Available |
| Sub-Spindle Horsepower | Not Available |
| Chuck Size (Main) | Not Available |
| Spindle | Not Available |
| Main Spindle Speed Range | Not Available |
| Second Spindle Nose | Not Available |
| Swing | Not Available |
| Rapid Traverse S | Not Available |
| Longitudinal Feed Range | Not Available |
| X2Nd Turret Positions | Not Available |
| Second Turret | Not Available |
| Multi-Tasking | Not Available |
| Maximum Work Weight | 27,800 Lbs |
| Machining Diameter | Not Available |
| Maximum Cutting Diameter (Lower Turret) | Not Available |
| Vertical Rail Travel (W-Axis) | Not Available |
| Rapid Traverse Z – Axis | 27.36" |
| Pallet-L | Not Available |
| Maximum Cuttin Dia. Chucking/Shaft | Not Available |
| C - Axis Travel Main Spindle | Not Available |
| Maximum Weight W | Not Available |
| X- Axis Thrust | Not Available |
| Tailstock Quill | Not Available |
| C-Axis Travel | Not Available |
| Control System | Not Available |
| Nc Position Table | Not Available |
| Max. Cutting Diameter(Bar Work) | Not Available |
| Main Spindle Torque | Not Available |
| Max. Thrust Force | Not Available |
| Dia. | Not Available |
| X2 - Travel | Not Available |
| Number Of Tool Turrets | Not Available |
| Swing Over Carrriage | Not Available |
| B - Axis Coupling | Not Available |
| Atc For Milling Spindle | Not Available |
| Maximum Speed | Not Available |
| Type Of Cone | Not Available |
| Spindle Bore Sub Spindle | Not Available |
| B Axis Increment | Not Available |
| Floor Space | Not Available |
| Rapid Feed Rate | Not Available |
| Makimum Cutting Diameter | Not Available |
| Chuck Sizes Main Subspindle | Not Available |
| Square Tool Shank Size | Not Available |
| C - Axis Rapid Traverse | Not Available |
| Tail Stock Travel | Not Available |
| Through Hole | Not Available |
| Z Axis Travel | 27.36" |
| Number Of Fixed Tool Holders | Not Available |
| Spindle Nose Camlock | Not Available |
| Main Spindle Drive Motor | Not Available |
| Maximum Distance Between Centers | Not Available |
| Spindle Horsepower 1 | Not Available |
| Mill Spindle Torque (2000 RPM Option) | Not Available |
| X Travel | Not Available |
| Tailstock Quill Travel | Not Available |
| Rapid Traverse Y Axis | Not Available |
| Machine Weight | 27,800 Lbs |
| Rapid Traverse Rate X/Z | Not Available |
| Swing Over Slide | Not Available |
| Longitudinal Feeds Range | Not Available |
| Stroke X | Not Available |
| Distance Between Spindle Faces (Min.) | Not Available |
| Tool Size (Square Shank) | Not Available |
| Spindle Nose Main Spindle | A2-8 |
| Z-Axis Stroke | Not Available |
| Lower Turret Live Tool Positions | Not Available |
| Capacity Maximum Swing | 26.77" |
| Rapid Traverse Rate B | Not Available |
| C, C-Axis (Indexing Pos. | Not Available |
| Second Spindle Chuck Size | Not Available |
| Safety Features | Not Available |
| Live Tooling Motor | Not Available |
| Spindle Center Height | Not Available |
| X-Axis Movement | Not Available |
| No. Axis | Not Available |
| C2-Axis Positioning | Not Available |
| C-Axis Rotation | Not Available |
| Spindle Horsepower (Cont/30 Mins) | 20/25 HP |
| Turret Configuration 2 | Not Available |
| Rapid Traverse Rate- X2 | Not Available |
| Z - Axis Travel 1, 2 | 27.36" |
| Spindle Nose 1, 2 | A2-8 |
| Atc | Not Available |
| Bar Capacity Head 1, Head 2 | 3.15" |
| Rapid Traverse Rate (X-Axis) | Not Available |
| Maximum Bar Work | 3.15" |
| Turret Configuration 1, 2 | Not Available |
| Second Headstock Rapid Traverse Rate | Not Available |
| Crimping Range | Not Available |
| Spindle Horsepower 2 | Not Available |
| Spindle Motor Sub | Not Available |
| Second Chuck Spindle Speed | Not Available |
| Rapid Traverse Rates X, Z/Y/B | Not Available |
| Turning | Not Available |
| Max. Machining Diameter Upper/Lower Turret | Not Available |
| Voltage | Not Available |
| Conveyor | Not Available |
| Twin Turret | Not Available |
| X-Axis (Cross Travel | Not Available |
| Tool Magazine Indexing Time | Not Available |
| Included | Not Available |
| Rapid Traverse (Z-Axis) | 27.36" |
| Y Axis | Not Available |
| Rapid Traverse Rates X, Z, B | Not Available |
| Boring Bar | Not Available |
| Maximum Distance Between Spindles | Not Available |
| Approximate Floor Space | Not Available |
| Spindle Indexing Increments | Not Available |
| Spindle Nose Main | A2-8 |
| Live Tool Speed | Not Available |
| Rapid Traverse X,Z,B | Not Available |
| Max. Machining Diameter Upper | Not Available |
| Tool Size Milling (Drill/End Mill/Tap) | Not Available |
| Inch Threading Range | Not Available |
| Sub-Spindle Speeds | Not Available |
| Feed Rates X/Z | Not Available |
| B-Axis Milling Spindle Horsepower | Not Available |
| Electrics | Not Available |
| Turrets #1 | Not Available |
| Rapid Traverse Rates | Not Available |
| Spindle Speed (Mill) | 12,000 RPM |
| X2-Axis Travel (Lower Turret) | Not Available |
| Number Of Turrets / Capacity | Not Available |
| Spindle Bearing Id | Not Available |
| Tool Storage Capacity | Not Available |
| Travels | Not Available |
| Controller | Not Available |
| Rapid Traverse Y | Not Available |
| Maximum Cutting Capacity Kn/Lbf | Not Available |
| Max Machining Length | Not Available |
| B - Axis (Tailstock) | Not Available |
| Stroke Of Turret | Not Available |
| Maximum Swing | 26.77" |
| Max Cutting Diameter | 19.69" |
| X-Axis Travels | 24.21" |
| Y-Axis Travels | +/- 4.92" |
| B-Axis Tilt | 220 Degrees |
| C-Axis Spindle Rotation | 0.0001 Degree |
| Spindle Nose | A2-8 |
| Spindle Bore | 3.54" |
| Bar Capacity | 3.15" |
| Spindle Motor | 20/25 HP |
| Tool Changer | 20 Tool |
| Milling Spindle Speed | 12,000 RPM |
| Milling Spindle Motor | 30 HP |
| Spindle Taper | MT #5 |
| Tailstock Travels | 40.39" |
| Total Cut Time | 11,800 Hours |
Do you have a Mazak INTEGREX-J-300 to sell?
<p>We are actively seeking a 2012 Mazak INTEGREX j-300 CNC Multi-Tasking Machine. This advanced machine is designed for precision metal cutting, offering exceptional capabilities in both milling and turning operations. With a maximum swing of 25.2 inches and a turning diameter of 19.69 inches, the INTEGREX j-300 is well-suited for a wide range of applications, making it a valuable asset for any manufacturing facility.</p> <p>Equipped with a main spindle that boasts a bore diameter of 3.46 inches and a maximum bar work capacity of 3.1 inches, this machine delivers impressive performance with a spindle speed of up to 4,000 RPM and a horsepower rating of 25 HP.
The B-axis milling spindle further enhances versatility, reaching speeds of 12,000 RPM and a horsepower of 30 HP. Additionally, the X-axis travel measures 24.21 inches, and the automatic tool changer (ATC) magazine capacity holds up to 20 tools, allowing for efficient and uninterrupted production runs.</p> <p>Sellers often part with machines like the Mazak INTEGREX j-300 due to various reasons such as upgrading to newer technology, downsizing operations, or facility closures. At Superior Machine Tools, we understand the importance of maximizing the value of your equipment, which is why we are dedicated to buying machines nationwide.
Our team is committed to providing a seamless experience for sellers looking to divest their CNC machinery.</p> <p>We offer fast payments and handle all logistics to ensure a hassle-free transaction. If you are considering selling your Mazak INTEGREX j-300 or any other CNC machine, we invite you to reach out to us today. Let us help you turn your equipment into cash quickly and efficiently.</p>
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.