Haas VF-4SS

What the maker publishes about the current Haas VF-4SS

Speed figures lead the Haas VF-4SS spec sheet: its spindle, direct-driven and inline, turns 12000 rpm at the top, and each linear axis rapids at 1400 ipm. This Super-Speed member of the VF Series has three axes, with X travel of 50.00 in. Y travel is 20.00 in and Z travel is 25.00 in. Spindle power comes to 30.0 hp, and torque at 2000 rpm is 90.0 ft-lbf. Taper options are CT40 and BT40, plus HSK-A63. Feed during cuts is capped at 833 ipm. Tool-to-tool time on the side-mount changer of 30+1 pockets averages 1.80 s, and a full chip-to-chip cycle is 2.40 s. Tool length can reach 13.00 in off the gage line. Parts sit on a 52.0 in by 19.5 in table carrying 5 T-slots and a 1750 lb load limit. Spindle nose to table distance runs from 4.2 in up to 29.2 in. Coolant capacity is 55 gal.

Source: Haas Automation, September 27, 2026.

Haas VF-4SS listing history

Where it was listed

Sellers also listed it as VF-4SS-APC.

Model years seen

2025 (3 units), 2023, 2022 (3 units), 2021 (8 units), 2020 (7 units), 2019 (5 units), 2018 (4 units), 2017 (3 units), 2016 (8 units), 2015 (6 units), 2014 (4 units), 2013 (6 units), 2012, 2011, 2010 (2 units), 2009, 2008 (5 units), 2007 (2 units), 2006 (6 units), 2005 (9 units), 2004 (5 units), 2003 (3 units).

What Haas VF-4SS listings agree on

Every Haas VF-4SS we have tracked

65 more Haas VF-4SS machines

5 more listings gave no year.

The Haas VF-4SS among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Haas machine we track.

Other CNC Vertical Machining Centers (VMC) models in this directory