Sell your Gleason Tag 1995 today.
Gleason Tag Specifications
| Maximum Outside Gear Diameter | Not available |
|---|---|
| C-Axis--Cutter Spindle (RPM) | Not available |
| Workpiece Spindle | Not available |
| Table Diameter | Not available |
| Approximate Weight | 19,000 lbs |
| B-Axis (Swivelling Axis) | Not available |
| Cutter Diameter | Not available |
| Max Pinion Drive Speed | Not available |
| Tool (B-Axis) | Not available |
| Style | Not available |
| Worktable | Not available |
| Pitch Angle (Max.) Shafts At 90° | Not available |
| Tangential Slide Travel | Not available |
| Radial Slide Travel | Not available |
| Cross Axis Angle Displacement (U-Axis) | Not available |
| Maximum Module | Not available |
| Min. Wheelbase For Internal Gears | Not available |
| Spindle Power | Not available |
| Optional | Not available |
| Net Weight (Approximate) | 19,550 lbs |
| Approximate Dimensions | Not available |
| Floor Space (Length & Width) | Not available |
| Coolant Ac Induction | Not available |
| Largest Axial Slide Path | Not available |
| Y-Axis | Not available |
| Max. Shaving Cutter Bore Diameter | Not available |
| Z Axis | Not available |
| Milling Head Diameter | Not available |
| Maximum Part Diameter | Not available |
| Pitch Angle-Min. | Not available |
| Shafts At 90 Degrees | Not available |
| Overall Diameter | Not available |
| Max Wheel Diameter | Not available |
| Diameter | Not available |
| Sliding Base Travel (Z-Axis) | Not available |
| Hob Lengths Up To | Not available |
| Mounting Taper | Not available |
| Max. Gear Width | Not available |
| Spindle Nose To Machine Center | Not available |
| Y-Axis Vertical Ac Servo | Not available |
| X-Axis | Not available |
| Tool | Not available |
| Maximum Workpiece Length | Not available |
| Axis X | Not available |
| Dressing Type | Not available |
| Largest Width Of Tooth Face | Not available |
| Largest Champable Hob Diameter | Not available |
| Tooth Form Milling | Not available |
| Weight (Manual Loaded) | Not available |
| Maximum Hob Setting Angle | Not available |
| Filtration Unit | Not available |
| Max. Center Distance | Not available |
| 2 To 1 Ratio | Not available |
| Gear | Not available |
| Max. Offset Below Center | Not available |
| Work Piece Table | Not available |
| Export Shipment | Not available |
| Hob Spindle Taper | Not available |
| Maximum Workpiece Diameter (Manual Load/Unload) | Not available |
| Maximum Hob Length | Not available |
| Max. Face Width | Not available |
| Cutter Width Maximum | Not available |
| Workhead Angle | Not available |
| Lapping Compound Pump Motor | Not available |
| Maximum Rapid Traverse Rate (Radial) | Not available |
| Capacity | Not available |
| Diameter Cutters | Not available |
| Max. Drive Spindle Speeds | Not available |
| Machine Type | Not available |
| Max. Pitch | Not available |
| Root Angle Range (B Axis) | Not available |
| Feeds And Speeds | Not available |
| X-Horizontal | Not available |
| Oscillating Drive Motor | Not available |
| Z Axis - Grinding Wheel Head | Not available |
| Loading | Not available |
| Max Face | Not available |
| Max Dp | Not available |
| B-Root Angle | Not available |
| Enabled Features | Not available |
| Feed(Sec/Tooth) | Not available |
| Wheel Width | Not available |
| Pinion Spindle Depth Of Taper | Not available |
| Max. Full Deep | Not available |
| Max. Wheel Diameter | Not available |
| Max. Grinding Spindle Speed | Not available |
| Runout Driven Spindle Face | Not available |
| Maximum Swinging Base Travel (B-Axis) | Not available |
| Cutter Speeds (Strokes Per Minute) | Not available |
| License Type | Not available |
| Machine Dimensions | Not available |
| Z-Axis--Sliding Base (Inches Per Second) | Not available |
| Hydraulic Clamping Device | Not available |
| Max. Depth | Not available |
| Hob Drive Motor | Not available |
| Minimum/Maximum Width Of Shaving Cutter | Not available |
| Max. Shaving Cutter Speed | Not available |
| Max Face Width | Not available |
| Maximum Workpiece Diameter | Not available |
| Cutter Size | Not available |
| Maximum | Not available |
| Diametral Pitch (Coarsest) | Not available |
| Chuck | Not available |
| Max Gear Diameter To Be Checked | Not available |
| Diametral Pitch (Coursest) | Not available |
| Y Vertical | Not available |
| Standard Testing Torque Load | Not available |
| Gleason Number | Not available |
| Depth Of Taper (Pinion Spindle) | Not available |
| Pinion Cone Range | Not available |
| B-Axis Swinging Base Ac Servo | Not available |
| Workpiece Headstock Swivelling Range B-Axis | Not available |
| Z-Axis - Sliding Base | Not available |
| Ds | Not available |
| Maximum Diameter Gear | Not available |
| Miscellaneous | Not available |
| Taper Per Foot | Not available |
| Max. Wheelbase For Internal Gears | Not available |
| Root Angle Range (B-Axis) | Not available |
| Work Table (C-Axis) | Not available |
| Gear Diameter Range | Not available |
| Clamping System | Not available |
| Spindle Bore Size - Gear | Not available |
| X-Axis - Horizontal | Not available |
| Max Gear Width | Not available |
| Axis Z | Not available |
| Machine Center To Work Spindle Face | Not available |
| Total Swivel Motion | Not available |
| Diameter Of Spindle Nose | Not available |
| Drive Spindle Bore (Taper Per Ft) | Not available |
| Full Depth | Not available |
| Max. | Not available |
| Operating Voltage | Not available |
| Type | Not available |
| Max. Shaving Cutter Width | Not available |
| Dimensions | Not available |
| Sell Your Used Equipment | Not available |
| Max. Diameter Of Gear | Not available |
| Depth Of Taper | Not available |
| Geneva Cam | Not available |
| Diameter Of Hole Through | Not available |
| Weight (Approximately) | Not available |
| Axial Travel | Not available |
| Design | Not available |
| C-Axis Rotary Table Diameter | Not available |
| Main Drive Spindle Motor | Not available |
| Rim Strength Max | Not available |
| Max. Gear Pitch Diameter | Not available |
| Max Table Load | Not available |
| Cutter Spindle Diameter | Not available |
| Direction -A | Not available |
| Gear Cone Range | Not available |
| Max Length | Not available |
| Max Dia | Not available |
| Origin | Not available |
| Module Range | Not available |
| Drive Spindle Speeds Variable | Not available |
| Hob Speed Range | Not available |
| Thickness | Not available |
| Spindle Bore Size - Pinion | Not available |
| Face Hobbing | Not available |
| Y Axis - Grinding Wheelbase | Not available |
| Weight Of The Machine | Not available |
| Max. Cone Distance | Not available |
| Face Width | Not available |
| Pitch Diameter | Not available |
| Included Components | Not available |
| Max Gear Outside Diameter | Not available |
| 1 To 1 Ratio | Not available |
| Max. Workpiece Length | Not available |
| Max Clamping Diameter | Not available |
| Largest Champable Hob Length | Not available |
| Application Type | Not available |
| Minimum Number Of Teeth | Not available |
| Environmental Temperature | Not available |
| Shaving Mechanism | Not available |
| Maximum External Gear Diameter | Not available |
| Hydraulic Pump Capacity | Not available |
| Y Travel | Not available |
| Pinion Spindle Nose To Gear Axis | Not available |
| Grinding Head - Swivable | Not available |
| Radial (X-Axis) | Not available |
| Maximum Internal Gear Diameter | Not available |
| Vertical Movement Y Axis | Not available |
| Workspindle Speed | Not available |
| Pitch Wheel Diameter | Not available |
| Work Spindle Bore (3-29/32 | Not available |
| Control Unit Model | Not available |
| Cutting Oil Pump Motor | Not available |
| Work Spindle | Not available |
| Bore | Not available |
| Coolant | Not available |
| Ac Induction | Not available |
| Weight Of The Machine Ca. | Not available |
| Horizontal Movement X Axis | Not available |
| Diameter Through Spindle Of Hole | Not available |
| Axial Cross Angle | Not available |
| Height | Not available |
| Number Of Teeth | Not available |
| Hub Diameter | Not available |
| Rapid Traverse Speeds Of Axis | Not available |
| Max. Horizontal Travel (X-Axis) | Not available |
| Module Min | Not available |
| Shaving Cutter Speed Range | Not available |
| Milling Head Swivelling Range | Not available |
| X-Axis Horizontal Ac Servo | Not available |
| Maximum Permissible Load | Not available |
| Largest Depth Of Teeth | Not available |
| Floor Space | Not available |
| Loader | Not available |
| Machines | Not available |
| Stroke Length | Not available |
| Compatible With | Not available |
| Z-Sliding Base | Not available |
| Control Type | Not available |
| Needed | Not available |
| Ratio | Not available |
| Approx. Weight | Not available |
| Max Cutter Diameter | Not available |
| Table Hole Diameter / Depth | Not available |
| Application | Not available |
| Gear Pitch Diameter | Not available |
| Pitch Angle-Max. | Not available |
| Machine Weight | Not available |
| Dimensions / Weight | Not available |
| Y Axis (Tangential) | Not available |
| A-Axis--Work Spindle (Face Milling)(RPM) | Not available |
| Interface | Not available |
| Max. Offset Above Center | Not available |
| Maximum Tooth Width | Not available |
| Max Workpiece Diameter | Not available |
| Maintenance | Not available |
| Index Plate | Not available |
| Max. Module | Not available |
| Range Of Angles | Not available |
| Production Capacity | Not available |
| Coolant System | Not available |
| Tooth Width (Plunge Shaving) | Not available |
| Control | CNC (GE Fanuc 15-M) |
| Weight | 19,000 lbs |
| Maximum Workpiece Weight | 150 lbs |
| Weight of Machine | 19,550 lbs. |
Do you have a Gleason Tag to sell?
We are actively seeking a 1995 Gleason Tag 400 gear grinder to add to our inventory. This exceptional piece of equipment combines precision and efficiency, making it a valuable asset for any manufacturing operation. The Gleason Tag 400 is designed for generating style gear grinding and boasts a remarkable 400 mm diameter capacity, accommodating a wide range of workpieces with a maximum weight of 150 lbs. Equipped with CNC controls, specifically the GE Fanuc 15-M, it allows for superior automation and precision in machining operations.
This model also features CNC dressing capabilities, which enhance the grinding process by ensuring optimal tool performance and longevity. Weighing in at 19,550 lbs, the Gleason Tag 400 is built robustly, ensuring stability during operation. Its Oberlin OPF 4 filtration unit is an added advantage, providing effective coolant filtration, which is crucial for maintaining the quality of the grinding process and extending the life of both the machine and the tools used. This machine is not just a grinder but a comprehensive solution for high-precision gear manufacturing.
If you own a 1995 Gleason Tag 400 gear grinder and are considering selling it, we would love to hear from you. At Superior Machine Tools, we specialize in purchasing used CNC machines and can offer you a competitive price for your equipment. Our process is straightforward and designed to make selling your machine as easy as possible. Contact us today to discuss your machine and see how we can help you turn your equipment into cash!
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.