Used Rollomatic Machines We Buy
Used Rollomatic machines come through Machine Tool Exchange as a single-brand grinding book, and we buy them outright from the companies that own them. This hub holds 43 Rollomatic listings: 24 filed as CNC Tool and Cutter Grinders, 14 as CNC Grinding Machines, 4 as CNC Miscellaneous Machines and 1 as a CNC Vertical Machining Center. Here is what actually moves an offer.
43 machines, page 1 of 2
Rollomatic 600-X Year (1999)
Rollomatic CNC 148 F3 Discontinued Model Brand ROLLOMATIC Type Tool
Rollomatic CNC148 P4 Discontinued Model Brand ROLLOMATIC Type Tool
Rollomatic CNC235NM CONTROL Discontinued Model Brand ROLLOMATIC Type Tooling
Rollomatic NP4 Discontinued Model Brand ROLLOMATIC Type Tool
Rollomatic 528XF Brand ROLLOMATIC Type Tool
Rollomatic 528XS Brand ROLLOMATIC Type Tool
Rollomatic 528XW Brand ROLLOMATIC Type Tool
Rollomatic 6000XL Brand ROLLOMATIC Type Tool
Rollomatic 6000XL Year 2005 Location Switzerland Category Grinding - Miscellaneous grinding (2005)
Rollomatic 620 XS Category Grinding - Miscellaneous grinding machines
Rollomatic 620XS ID (2003)
Rollomatic 628XI Brand ROLLOMATIC Type Tool
Rollomatic 628XS Brand ROLLOMATIC Type Tool
Rollomatic 628XW Brand ROLLOMATIC Type Tool
Rollomatic CNC 12
Rollomatic CNC 148 P4 Category Grinding - Miscellaneous grinding machines
Rollomatic CNC235NM
Rollomatic CNC235NM Brand ROLLOMATIC Type Tool
Rollomatic CNC246F Brand ROLLOMATIC Type Tool
Rollomatic CNC48F4 Discontinued Model Brand ROLLOMATIC Type Flute Grinders Looking for a US
Rollomatic CNC600X Category Grinding - Miscellaneous grinding machines
Rollomatic CNC600X Discontinued Model Brand ROLLOMATIC Type Tool
Rollomatic FRP200 Discontinued Model Brand ROLLOMATIC Type Wheel Dressing Machines Looking
What Is in the Rollomatic Book Right Now
Rollomatic is the only brand in this hub, and the book runs 43 listings. Twenty-four are filed as CNC Tool and Cutter Grinders, a majority of the page. Fourteen sit under CNC Grinding Machines, four under CNC Miscellaneous Machines, and one under CNC Vertical Machining Centers. So 38 of the 43 sit in a grinding-named category and five sit outside one. This is a small, single-brand specialist book, and the number that defines it is this: 42 distinct models across 43 listings. Exactly one model string repeats as written, the CNC-2000-XR, at two listings. One machine, the 620XS, is spelled four different ways across four listings. Almost everything else here is a single unit. That matters more than it sounds. There is no comparable-sale shortcut on a Rollomatic, so each one gets scoped on its own plate, control and condition rather than checked against a stack of identical machines that moved last quarter. That is why the detail on your first call carries real weight here.
The Tool and Cutter Grinders, and How the Catalog Spells Them
The 24 CNC Tool and Cutter Grinders are the bulk of this hub, and the record shows one machine written several different ways. The 620XS appears four times under four spellings: 620-XS, 620 XS, 620XS ID and 620XS. That makes it the designation that recurs most here, ahead of the CNC-2000-XR at two. The 148 does the same: CNC 148 F3, CNC 148 P4 and CNC148 P4 are three listings, with the P4 written two ways. The plate beats a text search every time. Past the 620XS, the CNC family is largest at seven listings, four filed as CNC Tool and Cutter Grinders and three as CNC Grinding Machines. CNC235NM accounts for three, two under tool and cutter grinding and one under CNC Miscellaneous Machines. The record also names 628XS, 628XI, 628XW, 528XS, 528XW, CNC246F, CNC48F4, CNC 24, CNC 24 ID, CNC 12, 24-F3, 600-X and NP4. The category page is /machine-type/cnc-tool-cutter-grinders/.
MicroGrind, NANO and the CNC Grinding Machines Side
Fourteen listings sit under CNC Grinding Machines, and several families cluster there. MICROGRIND accounts for three, and unlike the other families the catalog breaks out, all three sit under that one heading. They are not repeats of one machine: MICROGRIND 2000XE, MICROGRIND 2000XR and MICROGRIND 2000XD, three variants of the 2000. CNC600X accounts for three as well, two under CNC Grinding Machines and one under CNC Tool and Cutter Grinders, so like the CNC family it straddles both grinding headings. Elsewhere in the model record there are two 6000XL listings. NANO shows up three times, as NANO5, NANO6 and NANOGRIND, each a single unit, and a SHAPESMART appears once. A CNC235NM CONTROL is recorded as its own listing beside two plain CNC235NM entries, though those three are filed under tool and cutter grinding and CNC Miscellaneous Machines, not here. The shops running machines from this side of the book are cutting tool manufacturers, resharpening shops and aerospace suppliers, not the buyer shopping a surface grinder, so these get scoped one at a time. More of the category: /machine-type/cnc-grinding-machines/.
What Moves the Number on a Used Rollomatic
Forty-two distinct models across 43 listings means a Rollomatic is rarely valued against an identical sale. The plate designation is where it starts, not where it ends. Three things then move the number further than most sellers expect. Wheel spindle count is the first. The second is whether a loader or wheel changer came with it, which decides whether we quote a grinder or a cell. The third is the tool-design software, and whether the licence transfers with the iron. On this class of machine that shifts an offer more than the year does. After those: grinding capacity, axis count, control type and generation, wheel spindle specs, accessories, and whether it still holds tolerance. Jason Puuri weighs all of it himself rather than running a formula, so an older unit with its full package can scope better than a newer bare one. A quote typically comes back within 24 to 48 hours.
Have This Ready Before You Call
Start at the data plate, because this book gives a concrete reason. Only 8 of these 43 listings carry a build year at all. The other 35 carry none, so the year is the detail most likely to go missing when a Rollomatic changes hands. Pulling it off the plate or service records puts you ahead. Send the model and serial exactly as written, the build year if you have it, control type and generation, axis count, grinding capacity and wheel spindle specs. Then say what goes with the machine and what stays: wheel changer, loader, collets and steady rests, the measuring or probing option, and the tool-design software licence. Photos are not required, but three help: the control screen, the data plate, and one wide shot far enough back to show the loader and peripheral cabinet. MTE arranges rigging, crating and freight at no cost, in all 50 states, and pays at pickup.
Selling a Rollomatic Direct Instead of Listing It
MTE buys outright. We are not a broker, an auction platform or a consignment service, so you sell the machine to us rather than waiting on a third party. No listing fees, no broker fees, and payment at pickup instead of net 30. Any condition works: running, idle, or needing spindle work. MTE is an affiliate of Superior Machine Tools. Two things worth saying plainly. First, a Rollomatic that is not a tool grinder still gets an offer. This book already holds four listings under CNC Miscellaneous Machines and one under CNC Vertical Machining Centers, and the model record includes a LASERSMART500, an RPG, an FRP 250, an FRP200 and a DELTA 900. If it wears the nameplate, send it. Second, a mixed floor goes on one quote and one pickup. We also buy ANCA, Walter, Vollmer, Deckel and K.O. Lee tool grinders, plus Okamoto, Studer, Blanchard and Landis on the wider grinding side. More at /sell-your-tool-cutter-grinder/.
Common questions
Who buys used Rollomatic machines?
Machine Tool Exchange does. We are a direct buyer of Rollomatic equipment nationwide, not a broker, auction platform or listing service. You sell to us, not to a third party.
Do you buy Rollomatic GrindSmart tool grinders?
Yes. The GrindSmart series is named on our tool grinder sell page as something we buy. Send the plate designation and we scope it like any other Rollomatic.
Do you buy Rollomatic 620XS and 628 series grinders?
Yes. The 620XS is the designation that recurs most in this book, appearing four times under four spellings, and 628XS, 628XI, 628XW, 528XS and 528XW units sit in the record too.
Do you buy Rollomatic MicroGrind and NANO machines?
Yes. Three MICROGRIND listings sit in this book, all filed under CNC Grinding Machines, recorded as 2000XE, 2000XR and 2000XD, plus NANO5, NANO6 and NANOGRIND units.
How much is a used Rollomatic worth?
It depends on the model, number of axes, control, wheel spindle configuration, accessories and condition. We do not publish figures. Send those details and we quote the specific machine.
Will you buy a Rollomatic that is not a tool grinder?
Yes. This book already holds four listings under CNC Miscellaneous Machines and one under CNC Vertical Machining Centers, so a Rollomatic outside the tool grinding line still gets scoped.
Do you buy a Rollomatic that is not running?
Yes. Running, idle, or needing spindle work. Tell us upfront what is wrong so we scope the machine accurately instead of assuming it still cuts.
Thinking about selling Rollomatic Machines?
Forty-two distinct models across 43 listings means almost every Rollomatic is scoped on its own, not against a comparable sale. Send the plate designation, since this catalog spells the same 620XS four ways, and whether the wheel changer, loader and tool-design software licence go with it. Jason Puuri has a number back in 24 to 48 hours. Call 800-822-9524 or use /sell-your-cnc-machine/.