Used Henri Line Gantry Mills We Buy
Used Henri Line machines make up a compact, single-brand book here: 15 listings, every one of them Henri Line, and Machine Tool Exchange buys them directly from the companies that own them. Thirteen are filed as CNC gantry and portal mills and 2 as vertical machining centers, led by the GICAMILL, VERTAMILL and MACBORMILL lines.
15 machines, page 1 of 1
Henri Line GICA MILL Stock
Henri Line GICAMILL 15 LS/5 5-AXIS Discontinued Model Brand HENRI LINE Type Planer Type Mil
Henri Line GICAMILL (1997)
Henri Line GICAMILL 2
Henri Line GICAMILL 25 LS/5 Brand HENRI LINE Type Gantry Machining Centers
Henri Line GICAMILL 29 HS5 Discontinued Model Brand HENRI LINE Type Planer Type Mills Contr
Henri Line GICAMILL Discontinued Model Brand HENRI LINE Type Vertical Machining Centers
Henri Line MACBORMILL 235HS/6Q Discontinued Model Brand HENRI LINE Type Gantry Machining Ce
Henri Line POWERMILL V240 HS/5 Discontinued Model Brand HENRI LINE Type Gantry Machining Ce
Henri Line VERTAMILL 215 5-AXIS Discontinued Model Brand HENRI LINE Type Gantry Machining C
Henri Line VERTAMILL 215 Discontinued Model Brand HENRI LINE Type Gantry Machining Centers
Henri Line VERTAMILL 215 LS/5 Discontinued Model Brand HENRI LINE Type Gantry Machining Cen
Henri Line GICAMILL 29 LS/3 Discontinued Model Brand HENRI LINE Type Gantry Machining Cente
Henri Line GICAMILL 29 LS/3 ID
Henri Line MACBORMILL 235 HS Discontinued Model Brand HENRI LINE Type Gantry Machining Cent
What Is in the Henri Line Book Right Now
This hub holds 15 listings and Henri Line is the only brand in it. The category split is short and complete: 13 filed as CNC gantry and portal mills, 2 as CNC vertical machining centers, no third category. Worth pausing on: all 15 are distinct models. Nothing repeats in this book, so there is no comparable second unit to lean on when we scope one. Every machine gets read on its own data plate, its own control and its own condition rather than against a stack of identical units. That makes the questions we ask about a Henri Line more specific than the ones we ask about a brand where the same model crosses our desk a dozen times a year. Only one of these 15 carries a build year on file, so matching yours to something here by age will not work. The designation stamped on the plate is what places it.
GICAMILL, the Family We See Most
GICAMILL is the largest model family in this hub at 8 of the 15, and the only one appearing in both categories. Six of those 8 are filed as CNC gantry and portal mills and 2 as CNC vertical machining centers, which means both of this hub's vertical machining centers are GICAMILLs. The designations on file are worth naming rather than describing in the abstract: GICAMILL 29 LS/3, GICAMILL 29 LS/3 ID, GICAMILL 25 LS/5, GICAMILL 15 LS/5 5-AXIS and GICAMILL 29 HS5. Three of the eight carry no size suffix at all, recorded simply as GICAMILL or GICAMILL 2. One further listing is spelled GICA MILL with a space and rolls up on its own, not into that count of 8. We point that spelling variance out on purpose: it is exactly why we ask for a photo of the data plate instead of a model name typed into a spreadsheet.
VERTAMILL, MACBORMILL and the Rest of the Book
That leaves 7 listings outside the GICAMILL family, worth naming one by one in a book this small. VERTAMILL is 3 of the 15, all three filed as CNC gantry and portal mills: VERTAMILL 215, VERTAMILL 215 LS/5 and VERTAMILL 215 5-AXIS. MACBORMILL is 2 of the 15, recorded as MACBORMILL 235 HS and MACBORMILL 235HS/6Q. There is one POWERMILL V240 HS/5 and one GICA MILL. Run that against the category split and it closes cleanly. GICAMILL and VERTAMILL account for 9 of the 13 gantry and portal listings and both of the 2 vertical machining centers, which puts the two MACBORMILLs, the POWERMILL and the GICA MILL in gantry and portal mills. Outside those two GICAMILL vertical machining centers, everything here is a gantry or portal machine. Two records call themselves planer type mills in the vendor's own title text, and both sit under gantry and portal mills, not a separate planer heading.
What Moves the Number on a Henri Line Gantry Mill
A gantry or portal machine is not scoped the way a vertical machining center is. On a bridge-type machine we weigh way and rail condition down the full length of travel, gantry and column squareness, ram and head condition, the control make and generation, and whether it still holds tolerance across the whole envelope rather than one corner of it. A machine tight at one end of the rails and drifting at the other is a different conversation, better heard from you than found at inspection. Head configuration counts too: two of the 15 records here carry a 5-AXIS designation, GICAMILL 15 LS/5 5-AXIS and VERTAMILL 215 5-AXIS, and a head like that gets scoped on its own, not folded into a family average. Send brand, model, year, condition and control type. Jason Puuri weighs it himself rather than running a formula, and a quote typically comes back within 24 to 48 hours.
Discontinued Models and Thin Data Plates
Ten of the 15 model records here carry a discontinued model marker. That describes the model's production status and nothing else, not the listing, not the condition, not availability. Out of production has never ruled out an offer. What matters on a machine whose model line has ended is whether it holds tolerance and whether parts and service for its control remain reachable, since that drives how fast a shop could put it back to work. The catalog data argues for a plate photo better than we could. Two records are bare GICAMILLs, one a GICAMILL 2, one spelled with a space, and only one of the 15 carries a build year. Have ready: plate model and serial, build year, control make and generation, head configuration, whether it is still under power, and one wide shot of the floor. On a vertical machining center, add spindle hours, table size and axis travel.
Selling a Gantry Mill Direct Instead of Listing It
Machine Tool Exchange is a direct buyer, not a broker, an auction platform or a consignment service. You sell to us instead of waiting on us to find a third party. Once an offer is accepted we handle rigging, crating and freight at no cost in all 50 states, and payment comes at pickup rather than net 30. Condition is not a gate. Running production, idle since a job ended, or already decommissioned against a wall, all three get evaluated, and one machine or a full floor comes on the same terms. On something the size of a gantry mill the rigging plan is built around the real footprint and how the machine sits, not a spec sheet, which is why the wide floor photo matters. If the floor is mixed, other brands go on the same quote and schedule. Cincinnati, SNK, Zimmermann, Zayer, Correa and Fooke are all brands we buy.
Common questions
Who buys used Henri Line machines?
Machine Tool Exchange does. We buy outright and direct from the company that owns the machine, with no consignment, listing fee or third party.
Do you buy Henri Line GICAMILL machines?
Yes. GICAMILL is the largest family here at 8 of 15, and the only one appearing as both a gantry and portal mill and a vertical machining center.
My Henri Line model is discontinued. Will you still buy it?
Yes. Ten of the 15 records here are out-of-production models. What matters is whether the machine holds tolerance and its control stays serviceable.
How long does it take to get an offer on a Henri Line machine?
Typically 24 to 48 hours once we have brand, model, year, condition and control type. Photos speed it up but are not required.
Who pays to rig a gantry mill off the floor?
We do. Rigging, crating and freight are at no cost in all 50 states, and payment happens at pickup rather than net 30.
Do you buy Henri Line vertical machining centers too, or only gantry mills?
Both. Two of the 15 listings here are vertical machining centers, and both are GICAMILLs. We buy vertical machining centers of any brand or size.
Will you buy a Henri Line that is not currently running?
Yes. Running, idle and decommissioned machines all get evaluated. Tell us upfront which yours is so the scope is accurate from the start.
Can I sell other machines along with the Henri Line?
Yes, on one quote and one pickup schedule, whether it is a single machine or a full floor coming out during a changeover.
Thinking about selling Henri Line Gantry Mills?
Every one of the 15 Henri Line machines here is a different model, so nothing gets priced against a comparable second unit. Most are out of production, which changes the questions, not the answer. Photograph the data plate, call Jason Puuri at 800-822-9524 or use the offer form, and expect a number in 24 to 48 hours.